Analog Devices Inc. アナログ・デバイセズ AD9554/PCBZ 評価ボード
アナログ・デバイセズ AD9554/PCBZ 評価ボードは、クロック逓倍器付きマルチサービス適応クワッドチャンネル・クロック変換器の評価を支援します。AD9554/PCBZ 評価ボードは、6V 電源アダプタ、オンボード・スイッチング、およびLDO 電圧レギュレータを使ったシンプルな電源接続、12 個の出力用 AC 接続 SMA コネクタ(差動 x 4、シングルエンド x 4)、SMA コネクタ、2 つの差動または 4 つのシングルエンド参照入力およびシステムクロック入力に対応する SMA コネクタ、オンボード TCXO または水晶発振器、シンプル GUI インターフェースで 32 または 64 ビット Microsoft Windows® ベースの評価ソフトウェアに USB 接続、、オンボード PLL ループフィルタ、I/O ヘッダを介してデジタル I/O および診断信号に簡単にアクセス、診断シグナル用ステータス LED を特徴としています。AD9554/PCBZ は、動作電源電圧 1.8V、動作電源電流 745mA、周波数 1000MHz。電力測定のためにレギュレータを容易にバイパスできます。例えば、オンボード・スイッチング・レギュレータを使用して、オンボード LDO レギュレータをバイパスして、パフォーマンスを測定可能です。The AD9554/PCBZ Evaluation Board features a simple power connection using a 6V wall adapter, on-board switching & LDO voltage regulators, twelve AC-coupled SMA connectors for outputs (four differential, four single-ended); SMA connectors for two differential or four single-ended reference inputs & system clock input. Also included is on-board provisions for the TCXO, Crystal Oscillator or Crystal, a USB connection to a PC 32- or 64-Bit Microsoft Windows® based evaluation software with the simple graphical user interface, on-board PLL loop filter, easy access to digital I/O and diagnostic signals via I/O header, and status LEDs for diagnostic signals.
The AD9554/PCBZ has an operating supply voltage of 1.8V, operating supply current of 745mA, and frequency of 1000MHz. Designers can easily bypass regulators for power measurements. For example, designers can bypass the on-board LDO regulators to evaluate performance using the on-board switching regulator.
特徴
- Simple power connection using 6V wall adapter, on-board switching & LDO voltage regulators
- On-board LDO regulators can be easily bypassed to permit user to evaluate performance using the on-board switching regulator
- Regulators are easily bypassed for power measurements
- Twelve AC-coupled SMA connectors for outputs (four differential, four single-ended)
- SMA Connectors for
- Two differential or four single-ended reference inputs
- System clock input
- On-board provisions for TCXO, crystal oscillator, or crystal
- USB connection to PC 32- or 64-Bit Microsoft Windows® based evaluation software with simple graphical user interface
- On-board PLL loop filter
- Easy access to digital I/O and diagnostic signals via I/O header
- Status LEDs for diagnostic signals
仕様
- 1000MHz Frequency
- 1.8V Operating supply voltage
- GUI, I²C, SPI Interface type
- +85°C Maximum operating temperature
- -40°C Minimum operating temperature
- 745mA Operating supply current
