すべての結果 (84)

ドーターカードとOEMボード This simple board breaks out a female USB type A connector's VCC GND D- and D+ pins to a 0.1" pitch header. If you want to add a USB to your project but don't want to put up with soldering tiny connectors this is the board for you.Dimensions:

オプティカルセンサ開発ツール A simple breakout PCB for the GP1A57HR photo interrupter (also known as a photogate photodiode or phototransistor). This PCB has three connections for PWR GND and Signal.When the gate is clear SIG will be high (>4.9V). When the gate is blocked b

SparkFunアクセサリ Audio Jack Breakout Jack Breakout

インターフェイス開発ツール The factory is currently not accepting orders for this product.

インターフェイス開発ツール Opto-isolator Breakout

インターフェイス開発ツール This is a breakout board for the SP3485 RS-485 transceiver IC which will convert a UART serial stream to RS-485. The SP3485 is a half-duplex transceiver so it can only communicate one way at a time but it can reach transmission speeds of up to 10M

インターフェイス開発ツール This is the SparkFun USB to Serial Breakout for the FT232RL a small board with a built in USB to serial UART interface. This little breakout is built around the FT232RL IC from FTDI with an internal oscillator EEPROM and a 28-pin SSOP package thi

ドーターカードとOEMボード SOIC to DIP Adapter - 8-Pin

開発ボードとキット - ARM If you re ready to step your Arduino game up from older 8-bit/16MHz microcontrollers the SparkFun SAMD21 Mini Breakout is a great landing spot. The SAMD21 Mini Breakout is a Pro Mini-sized breakout for the Atmel ATSAMD21G18 a 32-bit ARM Cortex-M0

温度センサ開発ツール Digital Temp Sensor Breakout TMP102

ドーターカードとOEMボード Logic Level Convert Bi-Directional

オプティカルセンサ開発ツール Ambient Light Sensor B/O TEMT6000