Analog Devices Inc. HMC1122デジタルステップアッテネータ
Analog Devices HMC1122デジタルステップアッテネータは、0.5dBステップで31.5dBの減衰制御範囲を備えた0.1~6GHzに対応している6ビットアッテネータです。 高度なシリコンプロセスを使用して設計されたHMC1122アッテネータには、低電力消費、高速セトリング時間、高ESD堅牢性が備わっています。 優れたステップ精度、および周波数と温度範囲全体での高い直線性を目的に最適化されています。 オンチップレギュレータを使用するとHMC1122アッテネータは、性能に変化がない動作範囲の3.3-5V単電源で動作できます。 HMC1122の双方向、可換RF入出力は、内部で50Ωに整合されています。このRF入出力は、外部整合コンポーネントを一切必要としません。 HMC1122アッテネータには、アッテネータのシリアルおよびパラレル両方の制御を提供するドライバが組み込まれています。 このデバイスは、ユーザーによる選択が可能なパワーアップ状態およびシリアル制御部品をカスケード接続するシリアル出力ポートも特徴です。 安全状態過渡によって、RFシグナルチェーンにおけるコンポーネントの安全動作が保証されています。HMC1122's bidirectional, interchangeable RF inputs and outputs are internally matched to 50Ω. The RF inputs and outputs do not require any external matching components.
HMC1122 attenuators incorporate a driver that provides both serial and parallel control of the attenuator. The devices also feature a user-selectable power-up state and a serial output port for cascading other serial-controlled components. Safe-state transitions ensure the safe operation of the components in the RF signal chain.
特徴
- Attenuation range 0.5dB LSB steps to 31.5dB
- Low insertion loss
- 1.1dB at 1GHz
- 1.3dB at 2GHz
- High linearity
- Input 0.1dB compression (P0.1dB) 30dBm typical
- Input third-order intercept (IP3) 55dBm typical
- Typical step error less than ±0.1dB
- Safe-state transitions
- Excellent attenuation accuracy
- RF settling time (0.05dB final RF output) 250ns
- Low phase shift error 6° at 1GHz
- Single supply operation 3.3V to 5V
- ESD rating Class 2 (2kV HBM)
- 24-lead, 4×4mm LFCSP package 16mm²
アプリケーション
- Cellular infrastructure
- Microwave radios and very small aperture terminals (VSATs)
- Test equipment and sensors
- IF and RF designs
Block Diagram
公開: 2016-04-18
| 更新済み: 2022-03-11
