Microchip Technology MTD6508モータードライバ
Microchip Technology MTD6508モータドライバは、ブラシレスDC(BLDC)モータ用の3相、全波、センサレスドライバです。 MTD6508は、180°正弦波駆動、高トルク出力、サイレント駆動が特徴です。MTD6508には、適応型機能、パラメータ、広い2V~5.5V供給電力範囲が備わっており、このデバイスは最小限の外付け部品だけで広範囲のモータ特性をカバーすることができます。 速度制御は、電源変調(PSM)またはパルス幅変調(PWM)のいずれかから実行できます。 コンパクトな梱包と最小限の部品表で、MTD6508はファンアプリケーションに最適です。 周波数ジェネレータ(FG)出力によって、閉ループアプリケーションでの精密な速度制御が可能です。 MTD6508デバイスにはロックアップ保護モードが搭載されており、モータがロック状態の場合に出力電流をオフにできます。また、ロック状態が解除された際にファンを再起動する自動リカバリ機能が備わっています。 動作の安全性強化のため、モータ過電流制限と熱シャットダウン保護機能が搭載されています。 動作の安全性強化のため、モータ過電流制限と熱シャットダウン保護機能が搭載されています。 MTD6508モータドライバは、コンパクトで熱的に強化されたUDFNおよびUQFNパッケージで提供されています。The MTD6508 device includes Lockup Protection mode to turn off the output current when the motor is in a lock condition, with an automatic recovery feature to restart the fan when the lock condition is removed. Motor overcurrent limitation and thermal shutdown protection are included for safety enhanced operations. Motor overcurrent limitation and thermal shutdown protection are included for safety-enhanced operations.
The Microchip Technology MTD6508 Motor Driver is offered in compact, thermally-enhanced, UDFN-10 and UQFN-16 packages.
特徴
- 180° sinusoidal drive, for high efficiency and low acoustic noise
- 2.0V to 5.5V operating voltage range
- Position sensorless BLDC drivers
- No hall-effect sensor required
- Integrated power transistors
- Programming resistor (RPROG) setting to fit motor constant (Km) range from 3.25mV/Hz to 52mV/Hz
- Direction Control
- Forward direction: connect DIR pin to GND or leave floating
- Reverse direction: connect DIR pin to VBIAS
- Output PWM slew rate control programmable with an external resistor for start-up (adjustable version)
- Phase target selection for regulation (adjustable Version)
- Start-up strength selection (adjustable Version)
- Speed control through Power Supply Modulation (PSM) and/or Pulse-Width Modulation (PWM)
- Built-in Frequency Generator (FG Output Signal)
- Built-in lockup protection and automatic recovery circuit
- Built-in overcurrent limitation
- Built-in thermal shutdown protection
- Low minimal start-up speed for low-speed operation
- No external tuning required
- -40°C to +125°C operating temperature range
- Package options
- 3.0mm x 3.0mm x 0.5mm UDFN-10
- 4.0mm x 4.0mm x 0.5mm UDFN-16
アプリケーション
- Notebook CPU Cooling Fans
- 5V 3-Phase BLDC Motors
Functional Block Diagram
公開: 2017-07-12
| 更新済み: 2022-03-21
