Texas Instruments TPS25200 5V eFuse
テキサス・インスツルメンツの5V eFuse、TPS25200は、高精度電流制限と過電圧クランプを装備したeFuseです。このデバイスは、過電圧および過電流の発生時に負荷と電源に対して堅牢な保護を提供します。TPS25200は、VINの公差が20Vのインテリジェントに保護された負荷スイッチです。INに誤った電圧が適用された場合は、出力が5.4Vまでクランプして、負荷を受ける装置を保護します。INの電圧が7.6Vを超えると、負荷を受ける装置をこのデバイスが遮断し、デバイスや装置の損傷を防ぎます。TPS25200にはさまざまな異常事態の下にある電源、デバイス、装置を保護するための60mΩの内蔵電源スイッチがあります。このデバイスは最大2.5Aの連続負荷電流を供給します。電流制限は、85mAから2.9Aまでの範囲で、単一の接地レジスタでプログラムできます。過負荷が発生している間は、出力電流がRILIMで設定されたレベルに制限されます。過負荷がいつまでも続く場合は、ある程度の時間が経つと、デバイスがTPS25200の損傷を防ぐためにサーマル・シャットオフを開始します。The current limit is programmable from 85mA to 2.9A for TPS25200 and to 2.7A for TPS25200-Q1 with a single resistor to ground. During overload events, the output current is limited to the level set by RILIM. If a persistent overload occurs, the device will eventually go into thermal shutoff to prevent damage to the TPS25200/TPS25200-Q1. The Texas Instruments TPS25200-Q1 devices are AEC-Q100 qualified for automotive applications.
特徴
- 2.5V to 6.5V operation
- Input withstands up to 20V
- 7.6V input overvoltage shutoff
- 5.25V to 5.55V fixed overvoltge clamp
- 0.6µs overvoltage lockout response
- 3.5µs short circuit response
- Integrated 60mΩ high-side MOSFET
- Up to 2.5A continuous load current
- ±6% current-limit accuracy at 2.9A
- Reverse current blocking While disabled
- Built-in soft start
- Pin-to-Pin compatible with TPS2553
アプリケーション
- USB power switches
- USB slave devices
- Smartphones
- 3G, 4G wireless data cards
- Solid State Drives (SSD)
- 3V or 5V adapter powered devices
Datasheets
Functional Block Diagram
Development Tool
公開: 2014-09-09
| 更新済み: 2022-03-11
